|
| ขั้นต่ำ: | 0.5 ตัน |
| ราคา: | pending |
| การบรรจุแบบมาตรฐาน: | 25กก.ต่อกระสอบ 40 กระสอบต่อตัน 25-27ตันต่อตู้คอนเทนเนอร์ 1x20ฟุต |
| ระยะเวลาการจัดส่ง: | 3-5 วันทําการ |
| วิธีการจ่ายเงิน: | แอล/C, ที/ที |
| ความสามารถในการจัดหา: | สองพันตันต่อเดือน |
Product Description
What is Hot Melt Road Marking Paint?
Hot melt road marking paint, also called thermoplastic road marking paint, is a solid, heat-applied coating used for road markings like lines and symbols. It’s melted at 180–200°C, applied to pavement, and cools quickly to form a durable, reflective layer. Composed of thermoplastic resins, pigments, glass beads, and fillers, it’s long-lasting (1–5 years), eco-friendly (low VOCs), and highly visible, ideal for highways, parking lots, and crossings.
Specification
| Gravity(g/㎥) | 2.1g/㎥ |
| Color | Yellow, Orange, Red and etc. |
| Heating Temperature | 180℃-220℃ |
| Softening Point(℃) | 110℃ |
| Coating Appearance | No wrinkles, dots, blisters, cracks,fall-out&stick tyres |
| Drying Time(min) | Within 3 minutes |
| Chroma Performance | Reverse materials(white) |
| Compressive Strength(Mpa) | 26 |
| Abrasive Resistance(mg) | 42 |
| Alkali Resistance | Great (in saturated solution of calcium hydroxide for 24 hours |
| Glass Beads(%) | 20% |
| Fluidity(s) | 40s |
| Coating Resistance | Resis -10℃ for 4 hours |
| Package | 25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons |
| Heat Resistance | Under 200℃-220℃ for hours |
| Material | C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on. |
| Application | Road marking, straight line, dotted line, curve, oriented arrow,letter and etc. |
| Water Resistance | Great (in water for 24 hours) |
Steps to Use Thermoplastic Road Marking Paint
Technical Specification
| Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
วิดีโอ
วิดีโอ
วิดีโอ
วิดีโอ
วิดีโอ
วิดีโอ
วิดีโอ
วิดีโอ
|
|
| ขั้นต่ำ: | 0.5 ตัน |
| ราคา: | pending |
| การบรรจุแบบมาตรฐาน: | 25กก.ต่อกระสอบ 40 กระสอบต่อตัน 25-27ตันต่อตู้คอนเทนเนอร์ 1x20ฟุต |
| ระยะเวลาการจัดส่ง: | 3-5 วันทําการ |
| วิธีการจ่ายเงิน: | แอล/C, ที/ที |
| ความสามารถในการจัดหา: | สองพันตันต่อเดือน |
Product Description
What is Hot Melt Road Marking Paint?
Hot melt road marking paint, also called thermoplastic road marking paint, is a solid, heat-applied coating used for road markings like lines and symbols. It’s melted at 180–200°C, applied to pavement, and cools quickly to form a durable, reflective layer. Composed of thermoplastic resins, pigments, glass beads, and fillers, it’s long-lasting (1–5 years), eco-friendly (low VOCs), and highly visible, ideal for highways, parking lots, and crossings.
Specification
| Gravity(g/㎥) | 2.1g/㎥ |
| Color | Yellow, Orange, Red and etc. |
| Heating Temperature | 180℃-220℃ |
| Softening Point(℃) | 110℃ |
| Coating Appearance | No wrinkles, dots, blisters, cracks,fall-out&stick tyres |
| Drying Time(min) | Within 3 minutes |
| Chroma Performance | Reverse materials(white) |
| Compressive Strength(Mpa) | 26 |
| Abrasive Resistance(mg) | 42 |
| Alkali Resistance | Great (in saturated solution of calcium hydroxide for 24 hours |
| Glass Beads(%) | 20% |
| Fluidity(s) | 40s |
| Coating Resistance | Resis -10℃ for 4 hours |
| Package | 25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons |
| Heat Resistance | Under 200℃-220℃ for hours |
| Material | C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on. |
| Application | Road marking, straight line, dotted line, curve, oriented arrow,letter and etc. |
| Water Resistance | Great (in water for 24 hours) |
Steps to Use Thermoplastic Road Marking Paint
Technical Specification
| Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
